Accreditations

Standards Council of Canada

Accredited to ISO 17065 as a Certification Body for:

• Household Appliances
• Lighting Products (Luminaires)
• Industrial Equipment
• Hazardous Location Equipment
• IT Devices
• Commercial Products
• Cooking Appliances
• Audio/Video Devices
• Hydromassage Appliances
• Fenestration
• Energy Efficiency
• Gas and Solid Fuel Appliance
• ISEDC
• FCC
• EU Radio Equipment Directive
• EU Electromagnetic Compatibility Directive

Standards Council of Canada

Accredited to ISO 17065 as a Certification Body for: Respiratory Protective Devices

Standards Council of Canada

Accredited to ISO 17020 as an Inspection Body for Special Inspections (Canadian Electrical Code):

Special Inspections cannot apply to, and exclude, the following:

*Special inspections only applies to equipment that is capable of being connected to the supply in accordance with the Canadian Electrical Code, Part I.

• CSA SPE-1000, Model code for the field evaluation of Electrical Equipment
• CSA SPE-3000, Model code for the field evaluation of Medical Electrical Equipment and Systems
• wire and cable products;
• wiring devices;
• equipment for use in hazardous locations;
• components* that will require further evaluation as part of a complete assembly, such as switches, relays, and timers;
• equipment connected to line voltage in excess of 46 kV;
• man lifts, elevators, climb assists and similar systems (other than their associated control panels); and
• any equipment that is not permitted to be field evaluated as directed by an AHJ (such as air cleaning equipment that intentionally produces ozone).

International Accreditation Service (IAS)

Accredited to ISO 17025 as a Testing Laboratory for:

• Electromagnetic Compatibility (EMC) Testing
• Environmental Testing
• Product Safety Testing for Electrical/Electronic Products
• Product Safety Testing for Gas Appliances
• Product Safety Testing for Plumbing Fixtures & Fittings
• Marine/Recreational Craft Devices
• Efficiency Performance Testing
• Fire Rating Testing
• Fenestration Testing
• Sanitation Testing
• Energy Star

International Accreditation Service (IAS)

Accredited to ISO 17020 as an Inspection Body for:

Field Evaluations of the following Electrical Product Groups:

• NFPA 790, Standard for Competency of Third-Party Field Evaluation Bodies.
• NFPA 791, Recommended Practice and Procedures for Unlabeled Electrical Equipment Evaluation.
• Power distribution equipment under 600 volts, including switchboards, panelboards, motor control centers, transformers, and switches.
• Power distribution equipment over 600 volts (medium and high voltage}, including switchgear, motor control, transformers, and switches.
• Industrial control and utilization equipment, including industrial control panels, factory automation and equipment, industrial process equipment, motor-operated tools, and machinery such as air compressors, pumps, and so forth.
• Commercial utilization equipment and appliances, including commercial cooking equipment, motor-operated commercial cooking equipment, refrigeration and cooling equipment, heating equipment, laundry and dry-cleaning equipment, HVAC units, and fan units.
• Luminaires (lighting fixtures) and signs, including neon, LED, and messaging-type signs.
• Medical and dental equipment.
• Information technology equipment, including UPS systems and electronic control equipment.
• Wet location equipment, including pools, spas, hot tubs, and fountain equipment.
• Hazardous location equipment that has listed components for the area or is purged pressurized or ventilated in accordance with NFPA standards to be changed to unclassified status.
• Other similar electrical equipment.

ANSI-ASQ National Accreditation Board (ANAB)

Accredited to ISO 17025 as a Testing Laboratory for Intentional/Unintentional Radiator (Electromagnetic Compatibility) for the following product categories:

• Household Appliances
• Lighting
• Medical (Hospital devices, Home care, Dental, Hearing aids)
• Laboratory (Test & Measurement equipment)
• Wi-Fi Modules
• Radio Modules
• Marine equipment
• Satellite/Navigational systems
• IT/Audio Video

OSHA — Nationally Recognized Testing Laboratory (NRTL)

Nationally Recognized Testing Laboratory (NRTL)

Recognized as an OSHA Nationally Recognized Testing Laboratory (NRTL) as meeting the legal requirements in 29 CFR 1910.7 to perform testing and certification of products using consensus-based test standards.

Federal Communications Commission (FCC)

Recognized as a Testing Laboratory (Test Firm Registration #: 721268) for the following product categories: Product Categories:

• Household Appliances
• Lighting
• Medical (Hospital devices, Home care, Dental, Hearing aids)
• Laboratory (Test & Measurement equipment)
• Wi-Fi Modules
• Radio Modules
• Marine equipment
• Satellite/Navigational systems
• IT/Audio Video

Industry Canada (ISED)

Recognized as a Conformity Assessment Body (CAB # CA5970) for the following markets: USA, Europe (EMC, RED, and MED Directives), Australia/New Zealand, Taiwan, Korea, Japan, and Mexico. Product categories:

• Household Appliances
• Lighting
• Medical (Hospital devices, Home care, Dental, Hearing aids)
• Laboratory (Test & Measurement equipment)
• Wi-Fi Modules
• Radio Modules
• Marine equipment
• Satellite/Navigational systems
• IT/Audio Video

Industry Canada (ISED)

AB Registration No.: 2815

Recognized as an Approved Body under the Radio Equipment Regulations 2017 (SI 2017/1206) and the Electromagnetic Compatibility (EMC) Regulations 2016 (SI 2016/1091)

Industry Canada (ISED)

NB Registration No.: 2815

Recognized as a Notified Body under the Radio Equipment Directive (RED 2014/53/EU) and Electromagnetic Compatibility (EMC Directive 2014/30/EU).

IECEx System

• IEC 60079-0 Part 0: Equipment – General requirements
• IEC 60079-1 Part 1: Equipment protection by flameproof enclosures ‘d’
• IEC 60079-2 Part 2: Equipment protection by pressurized enclosures ‘p’
• IEC 60079-6 Explosive Atmospheres – Part 6: Equipment protection by liquid immersion ‘o’
• IEC 60079-7 Explosive Atmospheres – Part 7: Equipment protection by increased safety ‘e’
• IEC 60079-11 Part 11: Equipment protection by intrinsic safety ‘i’
• IEC 60079-13: Part 13: Equipment protection by pressurized room “p” and artificially ventilated room “v”
• IEC 60079-15 Part 15: Equipment protection by type of protection ‘n’
• IEC 60079-18 Part 18: Equipment protection by encapsulation “m”
• IEC 60079-25 Part 25: Intrinsically Safe Electrical Systems
• IEC 60079-26 Part 26: Equipment with Equipment Protection Level (EPL) Ga
• IEC 60079-28: Part 28: Protection of equipment and transmission systems using optical radiation
• IEC/IEEE 60079-30-1: Part 30-1: Electrical resistance trace heating – General and testing requirements
• IEC 60079-31 Part 31: Equipment dust ignition protection by enclosure “t”
• IEC 60079-33: Part 33: Equipment protection by special protection ‘s’
• ISO 80079-36: Part 36: Non-electrical equipment for explosive atmospheres – Basic method and requirements
• ISO 80079-37: Part 37: Non-electrical equipment for explosive atmospheres – Non electrical type of protection constructional safety “c”, control of ignition source “b”, liquid immersion “k”
• IEC/TS 60079-46: Edition 1 Explosive atmospheres – Part 46: Equipment assemblies

ATEX

Recognized as a Notified Body under the ATEX Directive (2014/34/EU) for Testing & Certification of equipment and protective systems intended for use in potentially explosive atmospheres.

Controlled Goods Program

LabTest is registered under the Controlled Goods Program to examine, possess or transfer controlled goods in Canada. Registration No. CG19075

Solar Rating & Certification Corporation (SRCC)

LabTest is approved to provide test results in accordance with the SRCC Testing Laboratory Recognition Program.

Global Solar Certification Network (GSCN)

LabTest has been recognized by the Global Solar Certification Network (GSCN) and is part of a global network of certification bodies, inspectors, testing laboratories and solar thermal industry representatives for approvals of Solar products.

International Marine Certification Institute (IMCI)

Recognized Testing Facility for Testing for Recreational Craft Directive: EN ISO Standard(s):

• 7840, 8846, 8847, 8848, 8849, 9097, 10133, 10239, 10240, 10592, 11105, 11192, 12216, 13297, 13929, 14895, 15083, 29775

State of Washington

LabTest has been Recognized by the State of Washington for:

• Product Certification/Listing
• Field Labeling

U.S. Coast Guard

LabTest has been recognized by the United States Coast Guard as an independent laboratory for testing of Ballast Water Systems (46 CFR 162.060-20 and -30) and Electrical Equipment for Hazardous Locations to the following standards:

• IEC60079-0
• IEC60079-1
• IEC60079-2
• IEC60079-6
• IEC60079-7
• IEC60079-11
• IEC60079-15
• IEC60079-18
• IEC60079-25
• IEC60099-26
• IEC60079-31

Clark County — Nevada

Clark County – Nevada LabTest has been approved by the Clark County Building Department to perform the review, testing, and listing of fireplaces and gas features.

City of Los Angeles

Approved for listing of Mechanical & Plumbing products to meet the referenced standards found in the City of Los Angeles Mechanical Code, 2017 Edition.

Mechanical

Plumbing

• CSA Z21.1
• CSA Z21.13
• CSA Z21.50
• CSA Z21.88
• CSA Z83.11
• UL 197
• UL 1995
• UL 60335-2-40
• ASME A112.3.4 / CSA B45.9
• ASME A112.19.1 / CSA B45.2
• ASME A112.19.2 / CSA B45.1
• ASME A112.19.3 / CSA B45.4
• ASME 112.19.5 / CSA B45.15
• ASME A112.19.7 / CSA B45.10
• CSA B45.5
• UL 1261
• UL 1795

Recreation Vehicle Industry Association (RVIA)

LabTest has been recognized by RVIA to verify that the required equipment & material are identified as being listed by a listing agency that is recognized by RVIA

• NFPA 1192
• ANSI LV
• National Electrical Code

Australian Communication and Media Authority (ACMA)

Australia

LabTest has been recognized by ACMA, the Australian Regulatory Authority, under the APEC TEL MRA (CAB Identifier: CA5970) for:

• AS/NZS CISPR 11
• AS/NZS CISPR 12
• AAS/NZS CISPR 14-1
• AS/NZS CISPR 15
• AS/NZS CISPR 32
• AS/NZS CISPR-6-3
• AS/NZS CISPR-6-4
• AS/NZS CISPR-2
• AS/NZS CISPR 4295
• AS/NZS CISPR 4365

VCCI

VCCI Registered Laboratory

Japan

LabTest is a VCCI-registered EMC laboratory for measuring:

• Radiated Emissions below 1 GHz [View Certificate]
• Radiated Emissions above 1 GHz [View Certificate]
• Conducted Emissions at AC Main Power Ports [View Certificate]
• Conducted Emissions at Wired Network Ports [View Certificate]

BSMI — Taiwan (Chinese Taipei)

Taiwan (Chinese Taipei) LabTest has been recognized by BSMI of Chinese Taipei to perform product testing under Phase I of the APEC TEL MRA for:

• CNS 13438
• CNS 13439
• CNS 13803
• CNS 13783-11

Korea

LabTest has been recognized by Korea to perform product testing under the terms of Phase I of the APEC TEL MRA (CAB Identifier: CA5970) for:

• KN 61000-4-6
• KN-22
• KN-60
• KN-61-1, 1-2, 1-3, 1-4, 1-5, 2-1, 2-2, 2-3, 2-4
• RRA Notice 2008-3

Instituto Federal De Telecomunicaciones (IFT)

LabTest has been recognized as the first Conformity Assessment Body in North America for EMC testing for Mexico, under the Canada-Mexico MRA (CAB Identifier: CA5970):

• NOM-084-SCT1-2002
• NOM-088/1-SCT1-2002
• NOM-088/2-SCT1-2002
• NOM-EM-016-SCFI-2015
• NOM-208-SCFI-2016
• IFT-008-2015

State of North Carolina

LabTest has been recognized by the state of North Carolina for Testing and Certification for gas products as a third party laboratory.

Alberta Government

LabTest is recognized as a Certification and Inspection body by the Alberta Government for gas – fired appliances and equipment.

Vietnam

LabTest has been recognized by the Ministry of Information Communications (MIC) in Vietnam to perform, under phase 1 of the APEC TEL Mutual Recognition Agreement (MRA), equipment testing for:

• QCVN 18:2014/BTTTT
• QCVN 44:2011/BTTTT
• QCVN 54:2011/BTTTT
• QCVN 56:2011/BTTTT
• QCVN 65:2013/BTTTT
• QCVN 73:2013/BTTTT
• QCVN 74:2013/BTTTT
• QCVN 96:2015/BTTTT
• TCVN 7189:2009
• TCVN 7600:2010
• TCVN 7317:2003

Hong Kong

LabTest has been recognized by the Office of the Communications Authority (OFCA) in Hong Kong to perform equipment testing, under phase 1 of the APEC TEL Mutual Recognition Agreement (MRA), for:

• HKCA 1020
• HKCA 1039
• HKCA 1042
• HKCA 1043
• HKCA 1049
• HKCA 1056

RCMP

LabTest Certification Inc. is a recognized Testing Laboratory for Inspection, Testing, and Transportation of Prohibited Firearms, under the RCMP Canadian Firearms Program (Licence No. 13413891.0001).

Ohio

LabTest has been recognized by the Ohio Board of Building Standards for the following conformity assessment services:

• Testing Laboratory
• Listing Agency-Product Certification Body
• Inspection Body
• Field Evaluation Body
• Special Inspection Agency